A RedNet network requires a Gigabit network infrastructure. The following cable types are permitted:

Cat 5e

Cat 6

Both shielded and unshielded cables are suitable.

As dictated by the ANSI/TIA/EIA standards for network cabling, the maximum combined cable length between devices is 100m. This allows an installed cable to be up to 90m long, leaving a length of 5m of shorter cable to connect to the devices at each end.

Typically, this connection would be between one RedNet unit and a switch, or one switch and another switch. Please note that Wireless Networking is not supported with RedNet.

As always, if you have any questions or concerns, please use the "Contact Us" form at the top of this page.