Back to Focusrite.com
Focusrite Answerbase
The Official Source for Focusrite Product Support and Information
English | German
Glossary Contact Us
Search  
Main Index
 Compatibility
 Control 2802
 Current Saffire Range
 Focusrite/Digidesign
 Forte
 ISA Range
 iTrack
 Legacy Saffire Range
 Liquid Range
 Platinum Range
 Compounder
 MixMaster
 OctoPre
 OctoPre LE
 Penta
 Platinum Digital Options
 ToneFactory
 TrakMaster
 TrakMaster Pro
 TwinTrak Pro
 VoiceMaster
 VoiceMaster Pro
 Plug-ins
 Red Range
 Rednet
 Scarlett USB 2.0 Range
 Technical Articles
 Troubleshooting Guides
 User Manuals
 VRM Box
Main Index .: Platinum Range .: MixMaster

MixMaster

This product is now discontinued.

Articles

article MixMaster Troubleshooting Guide
No LEDs illuminate • Is the POWER switched on? • Is the correct mains voltage being used for your unit? If not, the fuse may blow, requiring the correct fuse to be refitted. (Click here to find...
2009-06-28    Views: 2109   
article What is the phase meter for on the MixMaster?
The phase meter shows you the phase relationship between the left and right channels. For signals panned centre (mono compatible) this should be 0 so if you are a broadcaster and are engineering a...
2005-08-08    Views: 3295   
article MixMaster expander is causing the signal to cut out.
If the MixMaster expander section causes the signal to cut out when engaged, and all of the expander meter LEDs light up, then the opto most likely needs replacing. Please contact the distributor...
2005-08-08    Views: 3711   
article The connector from my MixMaster digital board does not fit into the socket on the main board of the unit. What is wrong?
On very early MixMasters the connector between the main board and digital card was different to on the later, standard models. If you have a very early MixMaster but a newer ADC card then you may...
2005-08-08    Views: 4035   


.: Powered by Lore 1.6.3

Copyright 2008 Focusrite Audio Engineering Ltd. All Rights Reserved.